1 Inch Continuous Hinge

1 Inch Continuous Hinge in a Mild Steel finish

1'' Open
3.2mm Pin
1.5mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Brass (Mild Steel Pin) finish

1'' Open
3.2mm Pin
1.5mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Stainless Steel finish

1'' Open
3.2mm Pin
1.5mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Aluminium finish

1'' Open
3.2mm Pin
1.5mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Mild Steel finish

1'' Open
3.2mm Pin
1.5mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Brass (Mild Steel Pin) finish

1'' Open
3.2mm Pin
1.5mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Stainless Steel finish

1'' Open
3.2mm Pin
1.5mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Aluminium finish

1'' Open
3.2mm Pin
1.5mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Mild Steel finish

1'' Open
2mm Pin
0.914mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Brass (Mild Steel Pin) finish

1'' Open
2mm Pin
0.914mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Stainless Steel finish

1'' Open
2mm Pin
0.914mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Aluminium finish

1'' Open
2mm Pin
0.914mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Mild Steel finish

1'' Open
2mm Pin
0.914mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Brass (Mild Steel Pin) finish

1'' Open
2mm Pin
0.914mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Stainless Steel finish

1'' Open
2mm Pin
0.914mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Aluminium finish

1'' Open
2mm Pin
0.914mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Mild Steel finish

1'' Open
3.2mm Pin
0.914mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Brass (Mild Steel Pin) finish

1'' Open
3.2mm Pin
0.914mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Stainless Steel finish

1'' Open
3.2mm Pin
0.914mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Aluminium finish

1'' Open
3.2mm Pin
0.914mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Mild Steel finish

1'' Open
3.2mm Pin
0.914mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Brass (Mild Steel Pin) finish

1'' Open
3.2mm Pin
0.914mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Stainless Steel finish

1'' Open
3.2mm Pin
0.914mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Aluminium finish

1'' Open
3.2mm Pin
0.914mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Mild Steel finish

1'' Open
3.2mm Pin
1.2mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Brass (Mild Steel Pin) finish

1'' Open
3.2mm Pin
1.2mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Stainless Steel finish

1'' Open
3.2mm Pin
1.2mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Aluminium finish

1'' Open
3.2mm Pin
1.2mm Thick
1820mm Long Section
12.7mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Mild Steel finish

1'' Open
3.2mm Pin
1.2mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Brass (Mild Steel Pin) finish

1'' Open
3.2mm Pin
1.2mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Stainless Steel finish

1'' Open
3.2mm Pin
1.2mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping

1 Inch Continuous Hinge in a Aluminium finish

1'' Open
3.2mm Pin
1.2mm Thick
1820mm Long Section
25.4mm Joint Length

Our Continuous Hinge is great for uses where support is needed along the full length of the door or panel.

These hinges can be cut down to suit the length required using one of our cutting disks

Continuous hinge can also be called piano hinge

Please note that this product hasn't been load tested

This hinge comes undrilled, we are able to add holes if required. Please contact us for a price on drilling, countersinking, slotting or tapping